FAQs
Have a question ? We are here to help.
We will send you an email to reset your password.
Vendor: Vanultra
Sku: 1650-105
WE ARE SOLD OUT! STAY TUNED FOR NEW UPDATES.
Ready to remove your roof top tent from your low-profile SUV roof rack without having to access the bottom of your tent? With this innovative new design, you can simply stand at your rear bumper and open and close the RTT mounts with an electric drill in seconds. No longer do you need to remove your cross bars or scratch up your knuckles trying to get to the bottom of your tent.
After eight months of development work with the Sherpa Equipment Company, we are excited to release a whole new method of installing and removing your roof top tent. This mounting system is specifically targeted for SUVs like Ford Broncos and Toyota 4Runners running low profile roof racks like Sherpa, Prinsu, TrailRax, UpTop, Wescott and more. The mounts act as large hooks that are designed to hook the front and rear cross bars. With the help of an electric drill, simply drive the long stainless steel threaded rod to open or close the RTT mounts. The system is perfect for RTT owners who have limited or no access to the bottom of their tents once installed on their vehicles.
The mountings hooks are specifically designed for 8020 2" wide x 1" tall cross bars that are most common on SUV roof racks. They are able to accept other roof racks like Front Runner Slimeline, Prinsu Pro, AluCab cross bars and others that have approximately 1" tall cross bar height.
NOTE: This product is NOT COMPATIBLE with GOBI roof racks.
SELECT OPTION
By filling out your information we will confirm we ship the right option to you!
We only manufactured 25 vehicles worth of mounts to learn more about use cases and to gain real-life experience. With this we are hoping to gain invaluable feedback from early adopters to learn how we can further improve the product before manufacturing at a larger volume next year. Please recognize that these mounts are an innovative new approach to solving a problem and may need some minor fine tuning. We will offer support for all of our customers and offer improvement upgrades as we determine best practices and tweaks. If this sounds like a great fit for you, please help support us in this new product launch!
The mounts ship fully assembled and ready to slide into your tent mounting rail. When received, please follow the included instructions for a few installation steps. NOTE: The mounts will raise your tent 1", we learned that this was necessary to avoid rattle noises. The threaded rods are 6 feet (72 inches) in length and are designed to fit full length wedge style roof top tents. If you have a shorter length clamp-shell or soft-shell roof top tent, please specify the length of your roof top tent and we can cut the threaded rod shorter as needed.
Selected for Best Gear of Overland Expo PNW 2024 by Overland Expo Staff.
We have created a short series of YouTube videos for the development and testing of this new product. If you are not ready to purchase yet but want to monitor the progress of this new mounting system, please subscribe to the project here. We will email you notifications about product updates and new video releases.
Episode 4: RTT Mounting Issues that you Need to Know
Episode 3: Preproduction Testing with Intrepid Camp Gear
Episode 2: Preproduction Testing with Sherpa
Episode 1: Prototype Testing with Sherpa
Yes it can! You can purchase a roof top tent lock or use a standard 1/2″ receiver hitch pin lock for 1-1/4″ Class I & II receiver.
This kit includes 4 roof top tent mounts. They arrive fully assembled but installation steps are required. Spacers are also included (if needed) but will need reassembly to install. Please follow the steps in the instruction manual.
Check the tent compatibility table and find the model of your roof top tent to learn if any special hardware is required to adapt to your tent.
Fit kits are required for wide crossbars that are between 3.4" and 5" wide. A Fit kit is also needed if you require the "rotating feature" for platform racks. Check out the available fit kits product page.
Our mounts are compatible with some roof rack platforms like Front Runner and others when combined with the 1235 Rotation Fit Kit. The washers will allow the mounts to rotate and clear the spacing.
NOTE: They are NOT compatible with the Rhino Rack Pioneer Platform because the slots are going front to back instead of side to side.
Vanultra mounts do NOT add height and will not space your tent up. On that note, these mounts are not designed to clamp to spacers or riser brackets. If you need extra height you could either raise the cross bars or consider alternative mounting solutions.
With hundreds of roof and bed racks constantly coming on the market we can’t list them all. Please feel free to reach out if in doubt. Our mounts will fit roof rack height’s between 0.75″ – 2.1″ and width’s between 0.75″ – 3.3″.
As a rule of thumb, you will need to be able to fit your arm underneath the cross bar to remove the pins and tighten the knob. Minimum 4" below the tent.
We offer free problem solving advice and quick and easy exchanges. We will do our best to ensure that the product fits correctly the first time, if not, we are happy to exchange it for you. Still concerned? We offer a 30 day return policy.
Yes, we offer a kit for 6 mount assemblies for $434. This may be necessary for set ups using a 3rd cross bar to help distribute the weight of the roof top tent. Please contact sales@vanultra.com to purchase.
Contact us at sales@vanultra.com so we can review your request and provide you with a quote for shipping and any international fees.