{"product_id":"xtr-offroad-5th-gen-4runner-roof-rack-2010-2024","title":"XTR Offroad 5th Gen 4Runner Roof Rack —  Overland Rack (2010-2024)","description":"\u003cdiv class=\"seo-keyword-intro\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eXTR Offroad 5th Gen 4Runner Roof Rack\u003c\/strong\u003e is a full-length, low-profile platform rack built for the \u003cstrong\u003e2010–2024 Toyota 4Runner\u003c\/strong\u003e and made in the USA. It bolts to the factory roof mounting points with no drilling, carries 10 powder-coated aluminum T-slot crossbars across an 86 in deck, and sits just 3.0–3.8 in above the roof. Front and side fairings keep it quiet at highway speed, and a 400 lb dynamic \/ 800 lb static load rating leaves room for a rooftop tent, cargo basket, awning, lights and the rest of your gear.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose This 5th Gen 4Runner Roof Rack\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo drilling:\u003c\/strong\u003e Four brackets bolt to the 4Runner's 8 factory roof mounting points with Toyota's own M8 roof bolts. You can return to stock at any time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed against leaks:\u003c\/strong\u003e Every mounting point gets an aluminum bushing sealed with black RTV silicone on both faces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length platform:\u003c\/strong\u003e 10 crossbars, 4 of them adjustable, across a deck of about 50 × 86 in. Room for several accessories at once, or a flat deck for cases and a rooftop tent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 T-slots per crossbar:\u003c\/strong\u003e Two on top, two underneath and one on each edge, so accessories mount above or below the bars with standard 10-series T-slot hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile:\u003c\/strong\u003e About 3.0 in above the roof at the front and 3.8 in at its highest point, measured at the mounting points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet to 80 mph:\u003c\/strong\u003e A full-width front fairing and side fairings that cover every crossbar end send air over the deck instead of across open bar ends. The front fairing ships with a seal already applied to cut wind noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-bar ready:\u003c\/strong\u003e Choose the standard front fairing or one with a cutout for a 40 in light bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to stay on year-round:\u003c\/strong\u003e Powder-coated aluminum crossbars, stainless steel hardware throughout and sealed mounting points, backed by our limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e This roof rack is made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eToyota 4Runner Roof Rack Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2010–2024 Toyota 4Runner (5th gen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDynamic load rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStatic load rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e800 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRack weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAbout 60 lb (27 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall size (W × L)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50.4 × 94.8 in (1280 × 2408 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossbars\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 50 in, 1020 aluminum T-slot (2 × 1 in), black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustable crossbars\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 (bars 3, 6, 7 and 8, counted from the front)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDeck length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e86 in, bar 1 to bar 10 (center to center)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight above roof*\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.0 in front \/ 3.5 in middle \/ 3.7 in rear \/ 3.8 in highest point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGap under crossbars at roof edges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0–2.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoof mounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 brackets on 8 factory mounting points, factory M8 bolts, 8 sealed aluminum bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFront supports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2, adjustable, resting on the roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFront fairing options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard, or 40 in light-bar cutout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack stainless M6 screws, stainless Nylock nuts, 304 stainless carriage bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMade in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrilling required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e*Measured from the roof at the mounting points. The roof is higher in the middle, so your 4Runner's overall height goes up by less than these figures.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10 crossbars, 50 in long, black powder-coated aluminum T-slot\u003c\/li\u003e\n\u003cli\u003eFront fairing with a wind-noise seal already applied (standard or 40 in light-bar cutout)\u003c\/li\u003e\n\u003cli\u003e2 front and 2 rear side fairings, 2 fairing joint brackets and 6 reinforcements\u003c\/li\u003e\n\u003cli\u003e4 roof brackets and 2 adjustable front supports\u003c\/li\u003e\n\u003cli\u003e8 aluminum mounting bushings\u003c\/li\u003e\n\u003cli\u003eAll rack hardware: black stainless M6 screws, stainless Nylock nuts and 304 stainless carriage bolts\u003c\/li\u003e\n\u003cli\u003e3 XTR badges with hardware\u003c\/li\u003e\n\u003cli\u003eBlack silicone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou reuse Toyota's 8 factory roof bolts. Accessories and their mounts are sold separately.\u003c\/p\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003e4Runner Roof Rack Installation\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis is a DIY, no-drill install. You build the rack on the ground, bolt and seal the brackets to the roof, then set the rack on the brackets. The illustrated instructions walk through 12 steps.\u003c\/p\u003e\n\u003ch3\u003eHow Long Does Installation Take?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eStage\u003c\/th\u003e\n\u003cth\u003eSteps\u003c\/th\u003e\n\u003cth\u003eSolo\u003c\/th\u003e\n\u003cth\u003eTwo people\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnpack and sort parts\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e20–30 min\u003c\/td\u003e\n\u003ctd\u003e15–20 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild the frame on the ground: side fairings, carriage bolts, front supports, 40 crossbar-end screws, front fairing and badges\u003c\/td\u003e\n\u003ctd\u003e2–7\u003c\/td\u003e\n\u003ctd\u003e1 hr 45 min – 2 hr 45 min\u003c\/td\u003e\n\u003ctd\u003e1 hr – 1 hr 45 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemove the factory rack or covers, then seal and install the brackets\u003c\/td\u003e\n\u003ctd\u003e8–9\u003c\/td\u003e\n\u003ctd\u003e35–60 min\u003c\/td\u003e\n\u003ctd\u003e25–40 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet the rack on the roof, center it, tighten everything and check\u003c\/td\u003e\n\u003ctd\u003e10–12\u003c\/td\u003e\n\u003ctd\u003e50–70 min\u003c\/td\u003e\n\u003ctd\u003e30–45 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e3½–5½ hr\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e2¼–3½ hr\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTimes are hands-on time for a first install. Add the 8-hour sealant cure explained below. Attaching the crossbars to the side fairings takes the most time for one person, because you hold a 50 in bar against a standing side fairing while starting the screws. With two people, one holds the bar while the other starts the screws, which is where most of the time is saved.\u003c\/p\u003e\n\u003ch3\u003eThe One Step That Needs a Helper\u003c\/h3\u003e\n\u003cp\u003eLifting the rack onto the roof. The assembled rack is about 60 lb and 50 × 95 in, and the 4Runner's roof is about 6 ft up, so plan on a second person for roughly 10 minutes.\u003c\/p\u003e\n\u003ch3\u003ePlan Around the 8-Hour Sealant Cure\u003c\/h3\u003e\n\u003cp\u003eDon't load the brackets until the RTV sealant has cured for 8 hours. Following the steps in order, that means an 8-hour pause between Step 9 and Step 10. To finish in one day, install and seal the brackets first (Steps 8–9), then build the frame on the ground while the sealant cures.\u003c\/p\u003e\n\u003ch3\u003eTools and Supplies\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 mm and 2.5 mm hex keys\u003c\/li\u003e\n\u003cli\u003e10 mm and 5.5 mm wrenches\u003c\/li\u003e\n\u003cli\u003eSocket for the factory M8 roof bolts\u003c\/li\u003e\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\u003cli\u003eTape measure\u003c\/li\u003e\n\u003cli\u003ePlastic trim tool\u003c\/li\u003e\n\u003cli\u003eBlack RTV silicone (Permatex 81158)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003ch2\u003e5th Gen 4Runner Roof Rack FAQ\u003c\/h2\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eDoes this roof rack fit my 4Runner?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eIt fits the 2010–2024 Toyota 4Runner (5th generation). It bolts to the factory roof mounting points at the middle and rear of the roof, the same points the factory roof rack uses. If your 4Runner has a factory rack, it comes off; if not, you remove the plastic covers over the mounting points. Two versions are available: a standard front fairing, or a front fairing with a cutout for a 40 in light bar.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eDo I need to drill holes or permanently modify anything?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNo drilling and no cutting. Four brackets bolt to the 8 factory mounting points with Toyota's own M8 roof bolts. Two front supports rest on the roof near the windshield and are not bolted. To go back to stock, unbolt the brackets, clean off the sealant, and refit the factory rack or covers. Remove the covers slowly during install, because their plastic clips can break if forced.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eCould it cause a roof leak or damage my paint?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eEvery mounting point is sealed. Each one gets an aluminum bushing with black RTV silicone on both faces, and the factory bolt passes through the sealed bushing into the factory threaded hole. The RTV cures for 8 hours before you load the rack or drive. The instructions protect your paint at each step:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean each mounting point so the seal bonds.\u003c\/li\u003e\n\u003cli\u003eAssemble the rack on a padded surface, not on the truck.\u003c\/li\u003e\n\u003cli\u003eLift the rack onto the roof with two people.\u003c\/li\u003e\n\u003cli\u003eLower the front supports until they just touch the roof, never forcing them down.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eCan I install it myself, and how long does it take?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eYes, with a helper for about 10 minutes to lift the rack onto the roof. A first install takes about 3½–5½ hours solo, or about 2¼–3½ hours with two people working together. Either way, add an 8-hour cure for the RTV sealant before the brackets can carry the rack. See the installation section above for the time breakdown and tool list.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eHow much height does it add?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eMeasured at the roof mounting points, the top of the rack sits about 3.0 in above the roof at the front, 3.5 in at the middle and 3.7 in at the rear. Its highest point, at the back, is about 3.8 in. Nothing sits above the crossbars, because the fairing tops are level with them or lower. The roof is higher in the middle than at the mounting points, so your 4Runner's overall height goes up by less than these figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWill my 4Runner still fit in my garage with the rack and accessories?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eAdd up three heights: your 4Runner's stock height, the rack's added height, and how far your tallest accessory rises above the crossbars. Compare the total with the lowest point of your garage opening, including the door, track and opener. Do the same check for drive-thrus, parking garages and car washes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eHow much weight can the roof rack carry?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe rack is rated for \u003cstrong\u003e400 lb dynamic\u003c\/strong\u003e (driving) and \u003cstrong\u003e800 lb static\u003c\/strong\u003e (parked). The rack itself weighs about 60 lb. Toyota's roof load limit in your owner's manual covers the rack plus everything on it, so the rack's own weight counts against that limit. The load reaches the roof through the 4 brackets on the factory mounting points; the 2 front supports only rest on the roof.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWill it support my rooftop tent?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe deck is flat from side to side, with 10 crossbars spread over about 86 in of roof. Tent rails or brackets bolt into the top T-slots with M6 or 1\/4-20 T-slot hardware, and four crossbars (3, 6, 7 and 8, counted from the front) can be moved to suit your tent's rails. Useful crossbar spacings, center to center:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e36.6 in: bars 5 and 9, directly over the roof brackets\u003c\/li\u003e\n\u003cli\u003e49.0 in: bars 4 and 9\u003c\/li\u003e\n\u003cli\u003e71.6 in: bars 2 and 9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck your tent's weight against the load ratings above, and remember that the rack's own 60 lb counts toward your 4Runner's roof load limit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWill the accessories I already own fit?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe crossbars are 1020 aluminum T-slot, 2 in wide and 1 in tall, with 6 T-slots each: 2 on top, 2 underneath and 1 on each edge. Accessories made for 10-series T-slot hardware (M6 or 1\/4-20) mount directly, as do clamps that fit a 2 × 1 in bar. The side fairings cover the ends of the bars, so to add hardware after assembly, use drop-in (twist-in) T-nuts such as our \u003ca href=\"\/products\/bag-of-16-ea-drop-in-t-nuts-15s-zinc-anodized-spring?variant=45477297094713\"\u003e1\/4-20 10-series drop-in T-nuts\u003c\/a\u003e, or slide nuts in before the fairings go on. Under the bars there's about 2.0–2.7 in of clearance at the roof edges and less toward the middle, so keep anything mounted underneath clear of the moonroof. For lights, the light-bar front fairing has a cutout for a 40 in light bar.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eDo I need the full platform, or would a pair of crossbars do?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe platform carries its load into the roof through bars 5 and 9, which sit on the brackets 36.6 in apart. Everything else is what the platform adds: room for several accessories at once along 86 in of roof, a flat deck for boxes, cases and tents, and fairings across the front and down both sides. The trade-off is weight: about 60 lb of your roof load limit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eHow much wind noise will it make?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe rack is designed to stay quiet up to 80 mph, even in a headwind rainstorm. The front fairing ships with a seal already applied to cut wind noise. A full-width front fairing sits just below the top of the first crossbar, and side fairings cover every crossbar end, so air goes over the deck instead of across open bar ends. Accessories that stand tall near the front of the rack can add noise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWill it affect fuel mileage?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eAny roof rack adds some weight and drag. This one sits low, about 3.0–3.8 in above the roof at the mounts, and is faired on three sides. Cargo on top usually has a larger effect than the rack itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eCan I leave it installed all year?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eYes. The crossbars are powder-coated aluminum, the hardware is stainless steel, and every roof mounting point is sealed. Check the hardware and seals on the maintenance schedule below.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eHow difficult is it to take off?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe rack lifts off in one piece. Remove the 8 M6 nuts (10 mm wrench) that hold it to the roof brackets, then two people lift it off. The brackets stay sealed on the roof, ready for the rack to go back on. To remove the brackets too, unbolt the 8 factory roof bolts, clean off the RTV silicone and refit the factory rack or covers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eCan I use an automatic car wash?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eWe don't recommend automatic car washes, including touchless washes. Brushes and cloth strips can catch on the rack and any mounted gear, and the strong detergents used in touchless washes can wear on the finish. Hand wash the rack with mild soap, water and a soft cloth or brush.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWhat is it made from, and how will it hold up?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCrossbars: 1020 aluminum T-slot with black powder coat\u003c\/li\u003e\n\u003cli\u003eFairings, brackets and reinforcements: high-strength aluminum\u003c\/li\u003e\n\u003cli\u003eHardware: black stainless M6 button-head screws, stainless Nylock nuts, 304 stainless carriage bolts and stainless badge hardware\u003c\/li\u003e\n\u003cli\u003eMounting bushings: aluminum, sealed to the roof with RTV silicone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe rack is made in the USA and backed by our limited lifetime warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWhat maintenance does it need?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eRe-check all hardware 30 days after your first drive, then once each season.\u003c\/li\u003e\n\u003cli\u003eInspect the RTV seal around each roof mounting point.\u003c\/li\u003e\n\u003cli\u003eReplace any Nylock nut that spins on freely. Their nylon inserts lose grip after repeated removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eCan the rack or accessories be locked?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNot as standard. The rack and T-slot accessories use standard hex screws and nuts, so gear can come off with a 4 mm hex key or a 10 mm wrench. Lock valuable gear with its own locks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWhen will it ship?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eEstimated lead time is 4–6 weeks. The rack ships unassembled; its longest part, the rear side fairing, is about 59 in long.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"xo-acc\"\u003e\n\u003csummary\u003eWhat if I have an installation or fitment problem?\u003cspan class=\"xo-ico\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eContact XTR Offroad support at \u003ca href=\"mailto:support@xtroffroad.com\"\u003esupport@xtroffroad.com\u003c\/a\u003e or \u003ca href=\"tel:+13163300024\"\u003e(316) 330-0024\u003c\/a\u003e. Have your model year, trim and photos of the problem ready. Every part has its own part number printed in the instructions, so include it if a specific part is involved.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e","brand":"XTR Offroad Products","offers":[{"title":"No Cutout","offer_id":45302617243705,"sku":"RFR-4RNR-E-STD","price":1350.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 40\" Light Bar Cutout","offer_id":45302617276473,"sku":"RFR-4RNR-E-LB","price":1350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0262\/8940\/6057\/files\/xtr-offroad-roof-rack-for-2010-2023-4runner-3604654.jpg?v=1768968817","url":"https:\/\/xtrusion-overland.com\/products\/xtr-offroad-5th-gen-4runner-roof-rack-2010-2024","provider":"Xtrusion Overland","version":"1.0","type":"link"}