{"product_id":"xtr-third-brake-light-chase-light-housing-with-feniex-quad-q3","title":"XTR - Third Brake Light \u0026 Chase Light Housing with Feniex Quad Q3","description":"\u003cp\u003e\u003cstrong\u003eA third brake light, amber chase light and white scene light in one housing, made to mount on the rear crossbar of your XTR1, XTR3 or XBRS bed rack.\u003c\/strong\u003e Inside are two US-made Feniex Quad Q3 lights, pre-programmed so the brake, chase and scene functions work out of the box.\u003c\/p\u003e\n\u003ch2\u003eWhy an XTR bed rack needs its own third brake light\u003c\/h2\u003e\n\u003cp\u003eYour truck's factory third brake light sits at the top of the cab, right where a bed rack load ends up. Put a rooftop tent, a soft topper, stacked cases or a kayak on your XTR rack and the drivers behind you may not see that light at all. This housing puts a center brake light back at the rear of the rack, behind the load. The amber chase function makes you easier to follow on dusty trails and convoy runs, and the white scene function lights up the area behind the truck when you're setting up camp after dark or backing into a site.\u003c\/p\u003e\n\u003ch2\u003eMade for the XTR bed rack platform\u003c\/h2\u003e\n\u003cp\u003eXTR bed racks are modular: 6061-T6 aluminum T-slot extrusion, CNC-machined corner brackets and bed rail brackets, set to the height your truck and setup need, then built out with MOLLE plates, recovery board mounts and lighting. This housing is designed for that system. It mounts at the center of the rear crossbar, and the harness runs inside the crossbar to a corner bracket, so there are no loose wires strapped across the back of your rack.\u003c\/p\u003e\n\u003cp\u003eIt fits the rear crossbar on every rack in the XTR family:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eXTR1 and XTR3 bed racks\u003c\/strong\u003e on an open bed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXTR racks for Retrax XR covers\u003c\/strong\u003e, mounted on the cover's rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXTR racks for soft toppers\u003c\/strong\u003e, where the topper itself can hide the cab's third brake light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXBRS low-profile bed bars\u003c\/strong\u003e, with the universal mount or the Retrax XR mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the light lives on the rack, it works the same on any truck we build XTR racks for — from the Tacoma, Ranger, Maverick and Gladiator to the Tundra, F-150, Super Duty, Silverado and Ram. It's the rear lighting of a chase rack, added to a rack you can still load, configure and upgrade.\u003c\/p\u003e\n\u003ch2\u003eXTR or XO.SKLTN: which version do you need?\u003c\/h2\u003e\n\u003cp\u003eWe make this light in two versions, and the housings are physically different. This one is for XTR1, XTR3 and XBRS racks. If you run an XO.SKLTN, our all-in-one system that goes from bed rack to topper to camper, order the \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xoskltn-third-brake-light-chase-light-housing-with-feniex-quad-q3\"\u003eXO.SKLTN Third Brake Light \u0026amp; Chase Light Housing\u003c\/a\u003e instead; it's made for the XO.SKLTN frame. Both versions use the same Feniex Quad Q3 lights, wiring and camera options.\u003c\/p\u003e\n\u003ch2\u003eThree lights in one housing\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake:\u003c\/strong\u003e solid red (dimmed setting), wired to your truck's brake light output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChase:\u003c\/strong\u003e solid full-bright amber, on a switched circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScene:\u003c\/strong\u003e solid full-bright white, on a switch or tied to your reverse lights so it works as extra backup lighting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Feniex Quad Q3 is a compact four-color light (red, blue, amber and white) used on police and first-responder vehicles. Each light can be reprogrammed for other colors and patterns, but that's at your own risk: the lights can also show blue, which isn't legal for civilian use. Read the Feniex Q3 instructions before changing anything, and check your state's lighting laws before running chase or scene lighting on the road.\u003c\/p\u003e\n\u003ch2\u003eChoose your version\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Camera Opening:\u003c\/strong\u003e a cutout for a WolfBox rear camera\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Camera Opening:\u003c\/strong\u003e a clean face, lights only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird Brake Light With WolfBox G900 PRO:\u003c\/strong\u003e the camera-opening housing plus a WolfBox G900 PRO smart dash cam and camera. On an XTR rack the camera sits on the rear crossbar, so you can still see behind the truck when a tent or gear on the rack blocks the view out your rear window.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery housing comes in matte black or gray.\u003c\/p\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHousing, 3D printed in carbon-fiber PETG (CF PETG), matte black or gray\u003c\/li\u003e\n\u003cli\u003e2 Feniex Quad Q3 lights, pre-programmed for brake, chase and scene\u003c\/li\u003e\n\u003cli\u003eWiring harness with a sealed IP67 4-pin plug a few inches from the housing, so the light can be disconnected, and about 9 ft of wire ending in bare leads for your truck’s brake, reverse and switched circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e switches are not included with any version. A WolfBox camera comes only with the Third Brake Light With WolfBox G900 PRO version; the With Camera Opening version has the cutout but no camera.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eDrill a 1\/2\" hole at the center of the rack's rear crossbar.\u003c\/li\u003e\n\u003cli\u003eFeed the harness through the hole and along the inside of the crossbar to one of the corner brackets, then bring the wire out through the corner bracket's wiring hole.\u003c\/li\u003e\n\u003cli\u003eConnect the leads (see the wiring photo): black = ground, blue = red (brake) +12V, brown = amber (chase) +12V, green = white (scene) +12V. Wire colors may vary.\u003c\/li\u003e\n\u003cli\u003eTie blue into your truck's brake light output, green into a switched or reverse circuit, and brown into a switched circuit. Check your truck's wiring before you start.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWill this fit my XTR1, XTR3 or XBRS rack?\u003c\/summary\u003e\n\u003cp\u003eYes. It mounts to the rear crossbar of XTR1 and XTR3 bed racks, including the Retrax XR and soft topper versions, and XBRS bed bars. For an XO.SKLTN, order the \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xoskltn-third-brake-light-chase-light-housing-with-feniex-quad-q3\"\u003eXO.SKLTN version\u003c\/a\u003e; the housings are different.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhy add a third brake light to a bed rack?\u003c\/summary\u003e\n\u003cp\u003eA rooftop tent, soft topper or tall load on the rack can block the third brake light on top of your cab. A light at the back of the rack keeps a center brake light in view of the driver behind you.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I run the chase and scene lights while driving?\u003c\/summary\u003e\n\u003cp\u003eRules for amber and white rear lights vary by state. Check your local laws before using either function on the road.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre switches included?\u003c\/summary\u003e\n\u003cp\u003eNo, not with any version. Plan on a switch for the chase light and one for the scene light, unless you wire the scene light to your reverse circuit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I change the colors or flash patterns?\u003c\/summary\u003e\n\u003cp\u003eYes, following the Feniex Q3 instructions, at your own risk. Blue light isn't legal for civilian use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003eShop more \u003ca href=\"https:\/\/xtrusion-overland.com\/collections\/xtr-accessories\"\u003eXTR bed rack accessories\u003c\/a\u003e, rear lighting in \u003ca href=\"https:\/\/xtrusion-overland.com\/collections\/third-brake-lights\"\u003ethird brake lights \u0026amp; chase lights\u003c\/a\u003e, or add Baja Designs S2 chase pods with \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xtr-offroad-reinforcement-plates-w-chase-lights\"\u003eXTR Reinforcement Plates with S2 cutouts\u003c\/a\u003e. Need the rack? See \u003ca href=\"https:\/\/xtrusion-overland.com\/collections\/xtr1-bed-racks\"\u003eXTR1\u003c\/a\u003e and \u003ca href=\"https:\/\/xtrusion-overland.com\/collections\/xtr3-bed-racks\"\u003eXTR3 bed racks\u003c\/a\u003e or \u003ca href=\"https:\/\/xtrusion-overland.com\/collections\/xbrs-bed-racks\"\u003eXBRS bed bars\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDesigned and built by \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xtr-third-brake-light-chase-light-housing-with-feniex-quad-q3\"\u003eXtrusion Overland\u003c\/a\u003e in Wichita, KS.\u003c\/em\u003e\u003c\/p\u003e","brand":"Xtrusion Overland","offers":[{"title":"With Camera Opening \/ Black","offer_id":50800250847289,"sku":"XTR-BKLGHT-BLK-WCO","price":220.0,"currency_code":"USD","in_stock":true},{"title":"With Camera Opening \/ Gray","offer_id":50800250880057,"sku":"XTR-BKLGHT-GRY-WCO","price":220.0,"currency_code":"USD","in_stock":true},{"title":"No Camera Opening \/ Black","offer_id":50800250912825,"sku":"XTR-BKLGHT-BLK-NCO","price":220.0,"currency_code":"USD","in_stock":true},{"title":"No Camera Opening \/ Gray","offer_id":50800250945593,"sku":"XTR-BKLGHT-GRY-NCO","price":220.0,"currency_code":"USD","in_stock":true},{"title":"Third Brake Light With WolfBox G900 PRO \/ Black","offer_id":50800250978361,"sku":"XTR-BKLGHT-BLK-WCO-WLFG900","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Third Brake Light With WolfBox G900 PRO \/ Gray","offer_id":50800251011129,"sku":"XTR-BKLGHT-GRY-WCO-WLFG900","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0262\/8940\/6057\/files\/XTR_third_brake_light.png?v=1792183665","url":"https:\/\/xtrusion-overland.com\/products\/xtr-third-brake-light-chase-light-housing-with-feniex-quad-q3","provider":"Xtrusion Overland","version":"1.0","type":"link"}