Darche Awnings

The Eclipse 270° Awning brings next-level shade to your 4WD camping setup. Offering a huge 11.5m² of instant cover, it spans the full length of your vehicle, then wraps around to the rear, giving you greater cover than a straight awning. Designed for an easy one-person set up, the unit is freestanding during set up and pack down. The heavy-duty alloy swivel hinge system holds the entire kit up while you extend and tension the awning arms and release the three pivoting alloy telescopic leg poles stowed along the rafters. Attach the final leg poles and you’ll be under cover in a matter of minutes.

The awning is made from premium 320gsm ripstop polycotton canvas and has an impressive PU 1500mm water rating plus seam sealing that will keep you dry in extended rainy conditions. The kit also includes a removable, heavy-duty 600gsm PVC cover for protection when you’re on the road.

The box-tube alloy arm system is light, strong and built to last. Available in left or right-hand side mount configurations (Australian passenger or driver side), you can put one on the car, on the camp trailer or the shed – your options are endless. With multiple wall panels to choose from (sold separately), you can set up one as a wind and weather break or add them all for a whopping 20.5m2 of shelter around your vehicle.

The included mounting brackets suit most commercially available flat roof rack or steel basket set ups. Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. We recommend professional installation through your local 4WD centre or ask your DARCHE dealer for advice about installation.

NOTE: for dual-cab ute installation – install over the tray OR the body – not over both. Ensure awning is anchored with supplied guy ropes and pegs at all times when in use.

KEY FEATURES

• Provides 11.5m² of cover in all weather conditions
• Freestanding set up mode allows for quick and easy one person set up/pack down
• Lightweight and strong construction
• Includes 3 x pivoting telescopic leg poles stowed on the rafters plus 3 x additional leg poles in a separate carry bag
• Includes 3 x mounting brackets, 2 x steel-buckled tension straps, guy ropes and pegs
• Includes transit cover
• Wall kits available (sold separately)

SPECS

The Eclipse 270° Awning brings next-level shade to your 4WD camping setup. Offering a huge 11.5m² of instant cover, it spans the full length of your vehicle, then wraps around to the rear, giving you greater cover than a straight awning. Designed for an easy one-person set up, the unit is freestanding during set up and pack down. The heavy-duty alloy swivel hinge system holds the entire kit up while you extend and tension the awning arms and release the three pivoting alloy telescopic leg poles stowed along the rafters. Attach the final leg poles and you’ll be under cover in a matter of minutes.

The awning is made from premium 320gsm ripstop polycotton canvas and has an impressive PU 1500mm water rating plus seam sealing that will keep you dry in extended rainy conditions. The kit also includes a removable, heavy-duty 600gsm PVC cover for protection when you’re on the road.

The box-tube alloy arm system is light, strong and built to last. Available in left or right-hand side mount configurations (Australian passenger or driver side), you can put one on the car, on the camp trailer or the shed – your options are endless. With multiple wall panels to choose from (sold separately), you can set up one as a wind and weather break or add them all for a whopping 20.5m2 of shelter around your vehicle.

The included mounting brackets suit most commercially available flat roof rack or steel basket set ups. Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. We recommend professional installation through your local 4WD centre or ask your DARCHE dealer for advice about installation.

NOTE: for dual-cab ute installation – install over the tray OR the body – not over both. Ensure awning is anchored with supplied guy ropes and pegs at all times when in use.

KEY FEATURES

• Provides 11.5m² of cover in all weather conditions
• Freestanding set up mode allows for quick and easy one person set up/pack down
• Lightweight and strong construction
• Includes 3 x pivoting telescopic leg poles stowed on the rafters plus 3 x additional leg poles in a separate carry bag
• Includes 3 x mounting brackets, 2 x steel-buckled tension straps, guy ropes and pegs
• Includes transit cover
• Wall kits available (sold separately)

SPECS

The Eclipse 180° Awning brings you instant cover, wherever the road takes you. With 8.2m2 of protection from the elements, this awning is suited to a wide range of vehicles and setups. Designed for an easy one-person set up, the unit is freestanding during set up and pack down. The heavy-duty swivel hinge system holds the entire kit up while you extend and tension the awning arms and release the two pivoting alloy telescopic leg poles stowed along the rafters. Attach the final leg poles and you’ll be under cover in a matter of minutes.

The awning is made from premium 320gsm ripstop polycotton canvas and has an impressive PU 1500mm water rating plus seam sealing that will keep you dry in extended rainy conditions. The durable box-tube alloy rafter system is strong and lightweight, supported by a heavy-duty alloy swivel hinge system. The kit also includes a removable, heavy-duty 600gsm PVC cover for protection when you’re on the road.

With the option to add on a wall (sold separately), you can have even more protection, extra privacy, cover for your gear or space for the swags - the options are endless.

The included mounting brackets suit most commercially available flat roof rack or steel basket set ups. Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. We recommend professional installation through your local 4WD centre or ask your DARCHE dealer for advice about installation.

NOTE: for dual-cab ute installation – install over the tray OR the body – not over both. Ensure awning is anchored with supplied guy ropes and pegs at all times when in use.

KEY FEATURES

• Provides 8.2m² of cover in all weather conditions
• Freestanding set up mode allows for quick and easy one person set up/pack down
• Lightweight and strong construction
• Includes 2 x pivoting telescopic leg poles stowed on the rafters plus 2 x additional leg poles in a separate carry bag
• Includes 3 x mounting brackets, 2 x steel-buckled tension straps, guy ropes and pegs
• Includes transit cover
• Wall kits available (sold separately)

SPECS

One of your favourite Darche products has become much greener with the introduction of the latest eco-friendly recycled materials in the Eco 180° Awning. The ecoWGAF™ material cleans up and delivers high performance in tear strength, abrasion resistance, colour fastness and water repellency.

The Eclipse 180° Awning brings you instant cover, wherever the road takes you. With 8.2m² of protection from the elements, this awning is suited to a wide range of vehicles and setups. Designed for an easy one-person set up, the unit is freestanding during set up and pack down. The heavy-duty swivel hinge system holds the entire kit up while you extend and tension the awning arms and release the two pivoting alloy telescopic leg poles stowed along the rafters. Attach the final leg poles and you'll be under cover in a matter of minutes.

The awning is made from ecoWGAF^TM fabric (280gsm polyester oxford ripstop/100% recycled polyester) and has an impressive PU 5000mm water rating plus seam sealing that will keep you dry in extended rainy conditions. The durable box-tube alloy rafter system is strong and lightweight, supported by a heavy-duty alloy swivel hinge system.

With the option to add on a wall set (sold separately), you can have even more protection, extra privacy, cover for your gear or space for the swags - the options are endless.

The included mounting brackets suit most commercially available flat roof rack or steel basket set ups. Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. We recommend professional installation through your local 4WD centre or ask your DARCHE dealer for advice about installation.

NOTE: for dual-cab ute installation: install over the tray OR the body not over both. Ensure awning is anchored with supplied guy ropes and pegs at all times when in use

KEY FEATURES

• Freestanding set up mode allows for quick and easy one person set up/pack down
• Lightweight and strong box-tube aluminium alloy rafter arms
• Telescopic leg poles to handle uneven terrain
• Black powder coating on backing plate, rafter arms and poles
• Recycled and eco-friendly 900D fabric with extremely high tearing resistance
• Nylon 66 transit cover
• Includes 3 x pivoting telescopic leg poles stowed on the rafters plus 3 x additional leg poles
• Includes 3 x mounting brackets, 2 x steel-buckled tension straps, guy ropes and pegs
• Suitable for most commercially available flat roof rack or steel basket set ups.
• Wall set available (sold separately)

SPECS

If you want flexible shade and shelter options for your vehicle, the Eclipse 180V Versatile Awning has got you covered from all directions.

Giving you 4m² of protection from the elements, this versatile awning is designed to offer multiple mounting options that will suit a wide range of vehicles and uses. With side mount or rear mount flexibility, this awning is built to suit your changing needs and give you instant cover wherever the road takes you. It’s perfect for the camp site or the work site - you can use this awning anywhere.

Made for a quick and easy one person set up - the freestanding mode allows you to fully extend the awning arms before dropping the telescopic poles stowed along the rafters. There are two additional leg poles included that are simple to install, plus guy ropes and pegs to keep you stable and upright in all conditions.

The awning is made from premium 320gsm ripstop polycotton canvas and has an impressive PU 1500mm water rating and seam sealing that will keep you dry in extended rainy conditions. The awning also features pull tabs that let you create a water run off area, helping prevent water pooling on the top of the awning. The durable box-tube alloy rafter system is strong and lightweight, supported by a heavy-duty alloy swivel hinge system. The kit also includes a removable, heavy-duty PVC cover for protection when you’re in transit.

The included mounting brackets suit most commercially available flat roof rack or steel basket set ups. Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. We recommend professional installation through your local 4WD centre or ask your DARCHE dealer for advice about installation.

Add a wall kit (sold separately) and get even more protection from the weather, extra privacy, cover for your gear or a space for the swags - the options are endless.

Ensure awning is anchored with supplied guy ropes and pegs at all times when in use.

KEY FEATURES

• Versatile awning mounts to the side or rear of your vehicle
• Provides 4m² of cover in all weather conditions
• Freestanding set up mode allows for quick and easy one person set up/pack down
• Includes 2 x pivoting telescopic leg poles stowed on the rafters plus 2 x additional leg poles in a separate carry bag
• Heavy-duty construction and hinge system
• Includes 2 x heavy-duty brackets with fixings, 2 x steel-buckled tension straps, guy ropes and pegs
• Includes transit cover
• Wall kits available (sold separately)

SPECS

If you want flexible shade and shelter options for your vehicle, the Eclipse 180V Versatile Awning has got you covered from all directions.

Giving you 4m² of protection from the elements, this versatile awning is designed to offer multiple mounting options that will suit a wide range of vehicles and uses. With side mount or rear mount flexibility, this awning is built to suit your changing needs and give you instant cover wherever the road takes you. It’s perfect for the camp site or the work site - you can use this awning anywhere.

Made for a quick and easy one person set up - the freestanding mode allows you to fully extend the awning arms before dropping the telescopic poles stowed along the rafters. There are two additional leg poles included that are simple to install, plus guy ropes and pegs to keep you stable and upright in all conditions.

The awning is made from premium 320gsm ripstop polycotton canvas and has an impressive PU 1500mm water rating and seam sealing that will keep you dry in extended rainy conditions. The awning also features pull tabs that let you create a water run off area, helping prevent water pooling on the top of the awning. The durable box-tube alloy rafter system is strong and lightweight, supported by a heavy-duty alloy swivel hinge system. The kit also includes a removable, heavy-duty PVC cover for protection when you’re in transit.

The included mounting brackets suit most commercially available flat roof rack or steel basket set ups. Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. We recommend professional installation through your local 4WD centre or ask your DARCHE dealer for advice about installation.

Add a wall kit (sold separately) and get even more protection from the weather, extra privacy, cover for your gear or a space for the swags - the options are endless.

Ensure awning is anchored with supplied guy ropes and pegs at all times when in use.

KEY FEATURES

• Versatile awning mounts to the side or rear of your vehicle
• Provides 4m² of cover in all weather conditions
• Freestanding set up mode allows for quick and easy one person set up/pack down
• Includes 2 x pivoting telescopic leg poles stowed on the rafters plus 2 x additional leg poles in a separate carry bag
• Heavy-duty construction and hinge system
• Includes 2 x heavy-duty brackets with fixings, 2 x steel-buckled tension straps, guy ropes and pegs
• Includes transit cover
• Wall kits available (sold separately)

SPECS

If you want flexible shade and shelter options for your vehicle, the Eclipse 180V Versatile Awning has got you covered from all directions.

Giving you 4m² of protection from the elements, this versatile awning is designed to offer multiple mounting options that will suit a wide range of vehicles and uses. With side mount or rear mount flexibility, this awning is built to suit your changing needs and give you instant cover wherever the road takes you. It’s perfect for the camp site or the work site - you can use this awning anywhere.

Made for a quick and easy one person set up - the freestanding mode allows you to fully extend the awning arms before dropping the telescopic poles stowed along the rafters. There are two additional leg poles included that are simple to install, plus guy ropes and pegs to keep you stable and upright in all conditions.

The awning is made from premium 320gsm ripstop polycotton canvas and has an impressive PU 1500mm water rating and seam sealing that will keep you dry in extended rainy conditions. The awning also features pull tabs that let you create a water run off area, helping prevent water pooling on the top of the awning. The durable box-tube alloy rafter system is strong and lightweight, supported by a heavy-duty alloy swivel hinge system. The kit also includes a removable, heavy-duty PVC cover for protection when you’re in transit.

The included mounting brackets suit most commercially available flat roof rack or steel basket set ups. Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. We recommend professional installation through your local 4WD centre or ask your DARCHE dealer for advice about installation.

Add a wall kit (sold separately) and get even more protection from the weather, extra privacy, cover for your gear or a space for the swags - the options are endless.

Ensure awning is anchored with supplied guy ropes and pegs at all times when in use.

KEY FEATURES

• Versatile awning mounts to the side or rear of your vehicle
• Provides 4m² of cover in all weather conditions
• Freestanding set up mode allows for quick and easy one person set up/pack down
• Includes 2 x pivoting telescopic leg poles stowed on the rafters plus 2 x additional leg poles in a separate carry bag
• Heavy-duty construction and hinge system
• Includes 2 x heavy-duty brackets with fixings, 2 x steel-buckled tension straps, guy ropes and pegs
• Includes transit cover
• Wall kits available (sold separately)

SPECS

The Eclipse pull-out awning provides instant cover to any kind of camping setup. Perfect for new and seasoned campers alike, this awning is easy to integrate into your kit. The new and updated slimline profile is conveniently lightweight while also reducing the weight you’ll be adding to your rig and any added wind resistance.

It’s a breeze to set up - just release the aluminium poles stored away in the twin-channel rafters and use the twist lock feature to adjust to your preferred height. If you’re after some extra protection from the weather, you can always add on a front or side extension wall (sold separately).

The awning is made from heavy-duty, mould-treated 320gsm ripstop polycotton canvas, blocking out direct sunlight and harmful UV rays, and has an outstanding PU 2000mm waterhead rating to keep you dry on those rainy days. The uniquely designed pivoting hinges are made to be tough and crack resistant while still providing flexibility to reduce overall component stress. The awning packs away into a heavy-duty 1000D PVC transit cover featuring a weather-resistant zip to keep out road grime and dust while you’re out on the road.

NOTE: for dual-cab ute installation – install over the tray OR the body – not over both. Ensure awning is anchored with supplied guy ropes and pegs at all times when in use.

KEY FEATURES

• Updated slimline profile
• Easy set up
• Tough and super flexible pivoting hinges
• Lightweight and strong construction
• Includes 2 x mounting brackets, guy ropes, pegs and instruction manual
• Includes transit cover
• Wall extensions available (sold separately)

SPECS

2M X 2.5M Specifications

2.5M X 2.5M Specifications