Truck Bed Rack Accessories

Every XTR1, XTR3 and XBRS rack is built with T-slot profile construction, so accessories bolt into the channel anywhere along a crossbar, upright or brace. No drilling, and you can add or move things after the rack is on the truck. These are the accessories we make for our racks, plus the XO.SKLTN add-ons.

MOLLE panels

The XTR Modular MOLLE Plate ($72.95) bolts onto any XTR rack and gives pouches, recovery gear, fuel and tools a MOLLE grid. The XBRS Tread MOLLE Plate ($209.95) adds a tread-pattern panel. On an XO.SKLTN, the XO.SKLTN MOLLE Panels ($144.95) fit any side position in bed rack or topper mode, and there's a front panel ($169.99) too.

Tent, awning and gear mounts

• Rooftop tent brackets ($49.90): stainless, for any rack with 1530 extrusion, with no bolt sticking up past the crossbar. XO.SKLTN topper version $59.90.
• Awning Upright Kit ($145): bolts your awning into the rack's uprights with its own hardware, at the height you set. XO.SKLTN awning mounts $150.
• Recovery board mount ($38) for the side braces, Hi-Lift jack mount ($179) and Quick Fist riser mounts ($49) for shovels and axes.
• Rotopax mounting plate ($24.99) for XTR1, XTR3, XBRS and XO.SKLTN, and the bike mount adapter ($145) for standard bike racks on an XTR1 or XTR3.
• Universal T-Slot Mounting Plate ($22.50): a centered mounting point for a light, Rotopax or tool mount where a standard bracket won't reach. Fits 10- and 15-series extrusion.

Mounts we carry from other brands, for RotopaX, MAXTRAX, shovels and propane, are on gear mounts.

Getting into the bed

The XTR AXS Gate Kit ($239.99) turns an existing side brace into a gas-strut gate that pops up, so you can reach gear from the side without unbolting anything. XO.SKLTN owners have their own AXS Gate Kit ($309). The Slide Out Kit ($145) hangs a sliding tray from a side or top brace, and the Gear Cage ($249.99) adds storage along the inside walls of an XO.SKLTN topper.

Lights

The third brake light and chase light housing ($220) mounts on the rear crossbar of an XTR1, XTR3 or XBRS and holds two US-made Feniex Quad Q3 lights for brake, amber chase and white scene light. There's an XO.SKLTN version too. For Baja Designs pods, see the reinforcement plates with S2 cutouts ($69.99) and the swivel mount for Rock and Dome lights ($49.99).

Braces, bars and reinforcement

Add an XTR1 ($140) or XTR3 side/top brace set ($170) for more mounting rail, or a bottom crossbar kit ($223.95) for more bars down low. Parallel bars ($200.35) run the length of the rack for drawer slides or a custom floor. The Off-Road Reinforcement Plates ($76) bolt into the corners in 6061-T6 aluminum to stiffen the rack for rough trails, and recessed side brace brackets ($89.99) pull cases and bulky gear inboard.

Mounting kits and T-slot hardware

The Pinch Plate Mounting Kit ($49.99) mounts an XTR rack on trucks with standard bed rails and no factory accessory rail. Spare hardware for the Toyota deck rail, Jeep Trail Rail and Nissan Utili-Track is $30, and a 2024+ Ford Ranger needs bed rail filler pucks ($150). For small parts: drop-in spring T-nuts ($11 for 16), grab handles that double as tie-down loops ($20), and cut-to-size 1530 extrusion. More is on T-slot hardware and components.

Still choosing a rack? See all XTR truck bed racks, or the XO.SKLTN accessories page for topper parts. Questions: support@xtrusion-overland.com or (316) 330-0024.