Black Friday Active - Plus 0% Interest through Synchrony - More Details

XTR Bed Rack Mounting Kit for Toyota Deck Rail, Jeep Trail Rail & Nissan Utili-Track

Regular price $50.00 USD


Xtrusion Overland  |  SKU: KP-00074

Lead Times

Current Lead Times: 

Please Note That All Lead Times Are Estimations*

  • XO.SKLTN  | 10-12 weeks
  • XTR1, XTR3 & XBRS Bed Racks | 4-7 weeks
  • Extrusion Sub-Structures | 3-4 weeks
  • Xtrusion Branded Accessories | 1-2 weeks
  • Trailgates | 2-3 weeks 
  • Custom Powder Coat Colors | Allow up to 2 additional weeks

 

Our posted lead times are only estimations and rely on various factors, many times outside of our control. Historic challenging times within our industry have caused ripples in the supply chain world that have repercussions even on the smallest of components at times. As you would imagine, many companies in our industry are experiencing the same. 

Our bed racks are super cool, with the ability to be customized. But this causes a series of challenges due to the thousands of possible combinations regarding compatibility, availability, etc. However, we are constantly aiming at improving our processes, hiring and training our people to achieve a reliable fulfillment process. 

If you have additional questions about our lead times, please check our current estimations and reach out to our team if you need additional information. We thank you for your continued support and patience as we improve our processes.

While we would do our best to accommodate a specific need, please do not plan any trips or outings based on the estimated lead times. 

THIRD PARTY PRODUCTS

Xtrusion Overland started supplying various brands that go hand in hand with our own products, to provide a complete service and help us grow. This includes products that are drop shipped. Please be advised that availability and lead times of those product are solely impacted by the third-party vendor's schedule. Many products are sold under an open inventory method, as the technology to sync inventories is limited, therefore please reach out if a specific product is needed by a specific date for us to double check with the supplier for you!

Any potential delay that occurs in the sourcing, processing, or drop shipment at the third party level will be communicated to the best of our ability to the customer.


ESTIMATED DATE  |  LEAD TIMES

The estimated lead time provided when you placed your order is JUST AN ESTIMATE. It is not a guarantee that the product will be shipped on that date. The estimated lead time gives you some sense of what the current times to source, cut, pack and ship takes. Many times the lead time can be shorter, but likewise it can extend, depending on factors such as previous demand and current supply. We manufacture many components in house, but extenuating circumstances such as down time for maintenance or unscheduled downtimes for repairs might impact dates as well as delays related to our sourced components. There is a constant flow of parts and shipments, and sometimes the visibility becomes a challenge to pinpoint exactly when your product will ship.

Feel free to check on your order at any time. Be aware that our customer service team may not be able to give you an exact date for completion but rest assured we are tracking your order and it will be built in the order that it was received. 

Xtrusion Overland also reserves the right to cancel items from an order, offer an alternative substitution or issue refund accordingly when product is delayed at an unacceptable time frame or at the request of the customer.

Rack Angle Guide

 

Overland Rack Angle Compatibility

One Angle.
Every Build.

XTR bed racks use three rack angles — 9°, 13°, and 20° — each matched to specific vehicle setups and accessory families. Find the right angle for your build so every rail, crossbar, and mounting kit lines up perfectly.

Engineered quality

CNC billet strength

We didn't just join the strong extrusions with some sheet metal corner brackets — we put the aluminum where it makes a difference. Every angle variant uses the same 6061-T6 Aerospace grade billet, machined to precision to join all components with exact angular alignment.

  • ✓ All three angles share the same billet standard
  • ✓ 9°, 13°, and 20° brackets machined to exact specs
  • ✓ No sheet metal corners — pure aerospace aluminum
CNC billet corner brackets for XTR bed racks — available in 9°, 13°, and 20° angles
Quick Reference

Angle Compatibility

Rack Angle Product Line Compatible Accessories
9° Gladiator Series All Gladiator bed racks (XTR1, XTR3 and XBRS), Gladiator mounting kits, Gladiator-specific crossbars, including Softopper versions on Gladiator.
13° Soft Topper Series Soft Topper bed racks for all truck models (except Gladiator). 
20° Universal / Crossbars All XTR1, XTR3, XBRS Bed Racks, universal mounting rails, standard rack accessories (except Gladiator or Softopper)
9-degree Gladiator rail crossbar — XTR Gladiator series rack angle
9° angle

Gladiator Series

The 9° angle is dedicated to the Gladiator product line. This angle was engineered specifically for Gladiator rails and their mounting geometry, ensuring a flush, secure connection between your rails and any Xtrusion add-on accessories. This includes Softopper Gladiator Builds and XBRS for Gladiator.

Xo Skeleton Note: The XO.SKLTN Uses a complete different system not to be confused with Gladiator XTR 9 Degree components.

13-degree Soft Topper rail crossbar — XTR Soft Topper series rack angle
13° angle

Soft Topper Series

The 13° angle serves Soft Topper products. This intermediate angle provides the right compromise between load clearance and low profile when mounting accessories to Soft Topper rails and their compatible hardware.

Crossbars: XTR1 and XTR3 use 13° when mounted on Soft Topper setups.

20-degree universal rack crossbar — XTR universal and crossbar series
20° angle

Universal / Crossbars

The 20° angle is the default for all other Xtrusion products — universal mounting rails, standard crossbars, and general overland rack accessories. This is the most common angle in the industry and works with the widest range of roof rack and truck bed rack systems.

XBRS: XBRS crossbars use 20° components, the same as XTR1 and XTR3, so the joints stay compatible if you upgrade to a full rack. The one exception is XBRS for the Jeep Gladiator, which uses 9°.

Quick Reference

Xo Skeleton — Angle Breakdown

The Xo Skeleton uses two angles Gladiator Specific or Universal. However, some accessories might be compatible with both, because the top rail consolidates both angles into one. Crossbar mounts or awning mounts are compatible with both versions.

9° Angle

XOSKLTN Gladiator
Xo Skeleton Gladiator 9-degree angle
  • Gladiator rail mounts
  • Gladiator-specific hardware
  • Gladiator crossbar slots

13° Angle

XOSKLTN
Xo Skeleton Soft Topper 13-degree angle
  • Soft Topper rail mounts
  • Soft Topper mounting kits
  • Soft Topper crossbar slots

Note: The Xo Skeleton never uses the 20° angle.

How To Choose

The Right Rack Angle,
Explained

Every XTR accessory — crossbars, mounting brackets, add-on hardware — is cut for one specific angle. The right angle depends on your primary rail system or vehicle setup. Choosing the matching angle ensures every component in your build aligns correctly and carries load as designed.

  • Identify your rail system. Gladiator = 9°, Soft Topper = 13°, universal = 20°.
  • Check your crossbar type. XTR1/XTR3 come in all three — order the one matching your rails.
  • Stick to one angle per build. Mixing angles creates misalignment and stress points.
What determines the rack angle I need? +
Your rack angle is determined by your primary rail system or vehicle setup. Gladiator rails use 9°, Soft Topper setups use 13°, and universal or standard rack accessories use 20°. Choosing the matching angle ensures every accessory — crossbars, mounting brackets, and add-ons — aligns correctly.
Can I use a 20° crossbar with a Gladiator rail? +
No. Gladiator rails are engineered for 9° accessories. Using a 20° crossbar on a Gladiator rail will result in misalignment and improper load transfer. Always match your crossbar angle to your rail system.
Do Soft Toppers and Gladiator rails use the same angle? +
No. Soft Toppers use a 13° angle while Gladiator rails use a 9° angle. These angles are not interchangeable. If you're building with both types, you'll need separate angle-specific accessory sets.
Are XTR1 and XTR3 crossbars angle-specific? +
XTR1 and XTR3 crossbars come in three angle variants — 9°, 13°, and 20° — to match each rack system. The 20° variant is the default and works with universal racks. The 13° variant is used when paired with Soft Topper setups. Order the angle that matches your primary rail system.
Why do overland racks use different angles? +
Different rack angles exist to accommodate varying vehicle roof geometries, rail profiles, and load requirements. The 9° angle works well with Gladiator-style tubular rails. The 13° angle provides a middle ground for Soft Topper mounting systems. The 20° angle is the industry standard for universal applications and offers maximum load clearance.

Description

Spare mounting hardware for an XTR1 or XTR3 bed rack, or XBRS bed bars, on a truck with a factory accessory bed rail: the Toyota deck rail system (Tacoma, Tundra), the Jeep Trail Rail system (Gladiator) or the Nissan Utili-Track system (Frontier, Titan).

New XTR racks and XBRS kits for these trucks already include this hardware in the box. Order this kit when you need a spare set or a replacement. It holds each of your rack's bed rail brackets to the rail channel along the top of the bed, so the rack mounts with no drilling and no clamps on the bed rail.

BEFORE YOU ORDER

  • Buying a new XTR rack or XBRS kit? You don't need this. The mounting hardware for your rail is already in the box.
  • Toyota deck rail or Jeep Trail Rail: choose Toyota & Jeep. Nissan Utili-Track: choose Nissan.
  • XTR1 or XBRS (4 bed rail brackets): choose KIT4. XTR3 (6 bed rail brackets): choose KIT6.
  • No rail channel (Ford, Chevy, GMC, Ram)? You need the XTR Pinch Plate Mounting Kit instead.
  • Jeep Gladiator without the Trail Rail: XTR racks for the Gladiator mount to a bed rail, so add the TeraFlex Uinta Cargo Bed Rail System first.

Which version fits your truck?

If your truck has the factory rail, this kit fits. Look along the top inside edge of the bed for an aluminum channel with sliding tie-down cleats.

Fit chart: truck, factory rail and kit version
Truck Factory rail Choose
Toyota Tacoma (2015+) Toyota deck rail system Toyota & Jeep
Toyota Tundra (2007+) Toyota deck rail system Toyota & Jeep
Jeep Gladiator (2020+) Jeep Trail Rail system Toyota & Jeep
Nissan Frontier Nissan Utili-Track system Nissan
Nissan Titan Nissan Utili-Track system Nissan
Ford, Chevy, GMC, Ram No rail channel XTR Pinch Plate Mounting Kit

Not sure? Email support@xtrusion-overland.com a photo of your bed rail.

What's in the kit

Toyota & Jeep

  • KIT4 (XTR1, XBRS): 4 rail plates, 8 socket head cap screws (5/16"-18 x 1") and 8 SAE flat washers
  • KIT6 (XTR3): 6 rail plates, 12 socket head cap screws and 12 SAE flat washers

Each rail plate is cut from 3/16" 304/316 stainless steel with two 5/16"-18 stainless nut inserts pressed in. The screws and washers are grade 8 with a black zinc finish.

Nissan

  • KIT4 (XTR1, XBRS): 8 Unistrut-style channel nuts
  • KIT6 (XTR3): 12 Unistrut-style channel nuts

Bed Rail Mounting Kit: FAQ

Do I need to buy this with my bed rack?

No. New XTR1, XTR3 and XBRS kits for Toyota, Jeep and Nissan trucks with a factory rail include this hardware in the box. This listing is for spares and replacements.

Do I need this kit or the pinch plate kit?

It depends on your bed rails. If your truck has a factory accessory rail channel (Toyota deck rail, Jeep Trail Rail or Nissan Utili-Track), use this kit. If it has plain bed rails, as on Ford, Chevy, GMC and Ram trucks, use the XTR Pinch Plate Mounting Kit, which clamps to the bed rail instead.

What's the difference between the Toyota & Jeep and Nissan versions?

The Toyota & Jeep kit uses stainless rail plates with two threaded inserts each, one plate per bed rail bracket, and fits both the Toyota deck rail and the Jeep Trail Rail. The Nissan Utili-Track channel takes Unistrut-style channel nuts instead, two per bracket.

KIT4 or KIT6?

Match it to your rack's bed rail brackets. An XTR1 and an XBRS kit each have four, so they take KIT4. An XTR3 has six, so it takes KIT6.

How does it install?

On a Toyota deck rail or Jeep Trail Rail, slide the plates into the rail channel from the end of the rail and line one up under each bed rail bracket. On a Nissan Utili-Track, drop each nut into the channel anywhere along the rail and turn it to lock it in place. Then bolt each bracket down into the plate or nuts. No drilling.

My Gladiator doesn't have the Trail Rail. What do I do?

XTR1 and XTR3 racks for the Gladiator mount to a bed rail, so install the TeraFlex Uinta Cargo Bed Rail System first. Questions about your setup? Email support@xtrusion-overland.com.

Does it work with XBRS bed bars and the XO.SKLTN?

XBRS bed bars use this kit too, and new XBRS kits include it. The XO.SKLTN for the Tacoma uses its own deck rail mounts, which come in the box.

Will it rust?

The Toyota & Jeep rail plates and their nut inserts are stainless steel. The screws and washers are grade 8 steel with a black zinc finish.

Is it made in the USA? What's the warranty?

The rail plates are made in our shop in Wichita, Kansas. The kit is covered by our Lifetime Warranty.

Find your bed rack

Resources

XTR rack install video · Instructions · Lifetime Warranty

Questions? support@xtrusion-overland.com · (316) 330-0024

Designed and built by Xtrusion Overland in Wichita, KS. Toyota, Jeep, Trail Rail, Nissan, Utili-Track, Unistrut and TeraFlex are trademarks of their respective owners.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.