Black Friday Active - Plus 0% Interest through Synchrony - More Details

Bed Racks - Nissan Frontier - Xtrusion Overland

Nissan Frontier Bed Racks

(10 products)

Bed racks for all three generations of the Nissan Frontier: the 1998–2004 truck, the long-running 2005–2021 model and the 2022-and-newer Frontier. Every listing here is offered for the short and the long bed, so the decisions are XTR1 or XTR3, how tall, and which cover stays on the truck. XTR1 and XTR3 racks are built to order, to your height requirements, with T-slot profile construction at our shop in Wichita, Kansas.

Frontier racks and what they fit

Rack Rated* Years in the menu Heights
XTR1 Pre-configured 450 / 850 / 1,550 lb 1998–2004, 2005–2021, 2022+ 15" mid or 21.5" cab
XTR3 Pre-configured 500 / 850 / 1,750 lb 1998–2004, 2005–2021, 2022+ 15" mid or 21.5" cab
XTR1 Custom Height 450 / 850 / 1,550 lb 1998–2004, 2005–2021, 2022+ Any inch, 10" to 26"
XTR3 Custom Height 500 / 850 / 1,750 lb 1998–2004, 2005–2021, 2022+ Any inch, 10" to 26"
XTR1 for Retrax XR 450 / 850 / 1,550 lb 1998–2004, 2005–2021, 2022+ 15" mid or 21.5" cab
XTR3 for Retrax XR 500 / 850 / 1,750 lb 1998–2004, 2005–2021, 2022+ 15" mid or 21.5" cab
XTR1 Soft Topper 450 / 850 / 1,550 lb 2005–2021, 2022+ 23" or 24"
XTR3 Soft Topper 500 / 850 / 1,750 lb 1998–2004, 2005–2021, 2022+ 23" or 24"
XBRS Bed Bars 400 / 800 / 1,500 lb 1998–2004, 2005–2021, 2022+ 6" or 8"
XO.SKLTN Topper System 1,550 lb static 2022+ short bed Mid or full height

*Off-road / on-road / static, weight spread evenly across the crossbars. Stay under the truck's own bed-rail limit if it is lower.

Utili-Track, bed length and generation

On a Frontier with Nissan's Utili-Track channels on the bed rails, the racks fasten into the channels with channel nuts that drop in and turn into place, so nothing gets drilled. The hardware comes with the rack; a spare set is sold as the XTR Bed Rack Mounting Kit. No Utili-Track on your truck? Tell us the year and trim first.

  • Bed length: pick "Short" for the 5-ft bed or "Long" for the 6-ft bed. The soft topper menus call the longer one "Medium (6')".
  • 2022 and newer: every rack style is available, and this is the only Frontier the XO.SKLTN is made for (short bed).
  • 1998–2004: pre-configured, Custom Height, Retrax XR, XTR3 Soft Topper and XBRS menus include these years; the XTR1 Soft Topper starts at 2005.

Racks over a tonneau or a soft topper

  • Folding or rolling tonneau: the Wide Width brackets on most racks hold the rack 3" over the rails, enough room for most of these covers to work. Custom Height builds can swap to Standard Width brackets (1.35") for a lower fit.
  • Retrax XR: the XTR1 and XTR3 Retrax XR versions mount to the cover's T-slot rails so it still retracts, and XBRS comes with a Retrax XR mount option. With a Retrax EQ, order Custom Height with the Retrax bracket option.
  • Soft toppers (Softopper, Fas-Top, Bestop): our Soft Topper racks run 23" or 24" with uprights angled 13.3° to clear the topper's sides.
  • Anything else with T-slot rails: give us the brand and model first.

Need the cover? Shop Nissan Frontier bed covers.

15" or 21.5", and a tent that reaches the cab

At 15" the rack stays tucked behind the cab and is easier to load from the ground. The 21.5" option, labeled cab height in the menus, gives more room underneath for gear boxes. If the tent will hang over the cab, check how far the roof's highest point (or a roof rack) sits above the bed rail, then order Custom Height at least 1" above that.

Load ratings on a midsize truck

Off-road is the limit for rough trails and washboard, on-road for highway speed, and static for a parked truck, sleepers in a tent included. On a midsize truck the rack, tent, water and passengers add up, so check them against the payload on the door-jamb sticker. The payload guide on our blog breaks it down.

Nissan Frontier bed rack questions

Does my trim matter, PRO-4X included?

The menus go by year range and bed length, not trim, so a PRO-4X takes the rack for its year and bed. What matters is whether the truck has the Utili-Track rails; if it doesn't, email us first.

XTR1 or XTR3 on a Frontier?

The XTR1 stands on four uprights with two crossbars; the XTR3 puts an upright on each side at mid-bed and adds a third crossbar, so a tent or long load has more support, and its off-road rating rises from 450 lb to 500 lb.

Can I mount a rooftop tent?

Yes. Our stainless Rooftop Tent Brackets hold it to the crossbars. When parked, keep the tent and its occupants within the static rating; when driving, keep everything on the rack within the on-road rating.

Does the XO.SKLTN fit a Frontier?

Yes, on the 2022+ short bed. Stage 1A includes four 6" MOLLE panels, Stage 2A and 2B add the topper panels, or you can add them later with the Frontier Topper Panel Add-On Kit.

Want the rack taller or shorter later?

Use the Frontier Alternate Height and Conversion Kit. It has uprights from 10" to 26" for Standard, Wide, Retrax or soft topper brackets, and an XTR1-to-XTR3 option. Braces cut for the new height are sold separately.

More for the Frontier

Every XTR1 and XTR3 is covered by our Lifetime Warranty. For Frontier fitment help, phone (316) 330-0024 or write to support@xtrusion-overland.com. Proudly made in the USA.


Compare /5

Loading...