Use of T-Nuts into the Slot means you can attach anything. Anywhere.
Capable of expanding structures. (Think Erector Set!)
Many Accessories to compliment the design.
TONNEAU COVER COMPATIBLE
With either the standard width brackets, which allow up to 1.4" of clearance for tonneau, or the wide width option that helps with wide tonneau covers and softtopper applications.
*Creates gap between tonneau rails and bedrails. Recommended to use foam strip to seal gap, which is not included in kit. Fitment not guaranteed for all tonneau covers. Contact us for more details.
DID WE SAY PRESSURIZE?
The unique center bore on our brackets allows you have access to the center chamber of the Xtrusion Profile. You can then either tap it to create seals or add fittings. Interconnect members, add a holding tank, pressurize for shower outlet's and more!
Or you can simply use the center bore to run wiring inside the chambers for a clean accessory installation.
GOING ROUGH ON IT ?
Order your rack with the optional "Off-Road Reinforcement Plates".
These Laser Cut 6061 Aluminum Plates create a more rigid joint between crossbars and columns, helping under extreme off-road situations to keep the structural rigidity intact, and avoid fatigue.
Available in Glossy Natural Aluminum and Black Textured Powder Coat, to create contrasts with your set.
The best thing about our BedRack is the endless possibilities of configuration for Height and some Length variations. Additionally, you can create sub-structures below or above the main structure. We continuously create kits to complement the XTR1 with unique product offerings, such as a 2nd level hinged for access or a bottom slide out tray. But if you have an idea, let us know and we can quote it!
Our Bed Racks are compatible with most T-Slot Extrusion type hardware, so you are able to expand or get creative by using off-the-shelf components! Whether you order from us, or the "guy you know" that has a bunch of these from work!
From Roll-In T-Nuts, to solid motion bearings, possibilities are endless. We do sell Roll-In T-Nut kits for added benefit, and if you want additional Xtrusion to build more things, contact us for a quote! We promise it will be the best price around!
From Awning Mounts, Hi-Lift Blocks, or simple brackets, we are getting it all ready for a maximum product compatibility. If we don't offer it, drop us an email. We can make almost anything a reality!
WHY CHOOSE OUR PRODUCTS
MADE IN USA
Our products are made in the USA with 99% domestic components! Designed and Manufactured in Kansas!
SMALL FAMILY OWNED
We are a small family owned business. Your purchase will help support the fulfillment of the American Dream
100% MONEY BACK GUARANTEE
30 Day Money Back Guarantee. If you do not like the product, send it back for a refund. *Exceptions Apply.
CHECK OTHER PRODUCTS AND ACCESSORIES
"I really think you have a hit on your hands with this product. It seems plenty rigid. It was easy to install. It assembled quickly. And the pricing (even before the discount you gave me, THANK YOU!) is ridiculously good. I really think you could sell a ton of these"
JOHN BATTERSBY. FORD RANGER
First, thank you for the great communication while we were waiting on our products. Top Notch! Also, the rack assembled easily and is pretty straight forward when looking at the parts.
LOGAN SALTSMAN, FORD RAPTOR
"I started unwrapping it yesterday. I have never in my life seen something wrapped up so neat and tight! I'll keep you posted! Those corner brackets that say "Xtrusion" look awesome!!
Powder coat looks fantastic, I almost wish I had ordered all powder coat but the silver/black combo will look slick with my grey truck"
PATRICK WEAVER, FORD F150
When you go to the product page, you will have a configurator. You can select the different characteristics of your rack, such as platform, height, and length. The bracket type and width, the finish, additional optional products and accessories, etc. If you have questions about the ordering and configuration process, please contact us!
Our brackets are designed to slide under your tonneau rails. The fitment will vary brand. We have 2 width options to help with most tonneau covers. Bear in mind the wide brackets might push out the rack outside the boundaries of the truck's bedrails, although inside the perimeter of the truck. Also, if you have a "Tri-Fold" type cover, the brackets would fit underneath but the tonneau won't open all the way while the rack is installed.
You can remove 16 screws that will free up the BedRack! We recommend having a buddy to help you lift it and remove it, but if you are brave you can probably handle it on your own. You can decide to take the rack components apart for easy storage. Usually removing it and disassembling in 3 pieces, Top part of 2 crossbars and 2 top braces, and Side parts of 2 columns and 1 side brace. Alternatively you can take it all apart to store in a 6"x6"x60" area! Just remember it is easier to put back on the truck if it has been disassembled in 3 pieces instead.
We have many accessory mount plates available for most common items, as well as a modular, universal mount plate. However, one of the advantages of this system is that you can mount anything along the T-Slot rails when you get creative. You can make your own brackets, use brackets from a hardware store or mount things directly. All you need are either T-Nuts compatible (Roll-in or Drop-in are best to add), or T-Slot Studs. We will have some kits available in our product offering, but you can also source from EBAY or AMAZON! Any 8MM T-Slot for 40 Series (Metric) or 15 Series (Standard) accessories and hardware are compatible with our Xtrusion!
Yes you can! The aluminum material cuts pretty much like a wooden 2x4 with the right tools. A Miter Saw is usually all you need. Make sure your blade is sharp, and lubricate with WD-40 or similar while cutting. Bear in mind that modifying the original shape and form of the kit that was shipped to you could void the warranty or alter the cargo capacity.
While we maintain all components in stock, every kit is cut to order. This means that there is a processing period of 1-2 weeks before shipment. Additional delays may occur due to supply chain disruptions or stock issues. We will contact you if there are delays beyond the expected delivery time! Please do not plan any trips around delivery. If you do, contact us first and we'll see what can be done.
Shipping is based on where the Bed Rack kit is going. We have partnerships with Parcel companies so we just pass our cost to you. Our kits already have amazing prices to help you put your money on other accessories for your rig, unfortunately not much can be done on shipping. Each package varies in size and weight, and usually between 60 and 80 lbs, and 6.5X6.5X60 in length. Some times packages might be shipped from different places, so you might receive a box with the extrusion components and separate box for the brackets. This depends on our stock levels and our supply chain partners availability. Additional accessories and sub-structures ordered would increase shipping costs.
Shoot us an email at Support@XtrusionDesigns.com
We will respond as soon as possible! Alternatively, send us a message by Instagram or Facebook! We are always here to help!